Tools & Supplies - Eastern Iowa Community College District

CAMPUS FOCUS

Uniforms

Uniforms are not required but each student must have safety glasses and leather work shoes. Sneakers and shorts are not allowed in laboratory areas.

Tools

Students are responsible for having their own tools. The minimum tools needed for completion of this program are listed below.

1/4" drive socket set - Box, ratchet, 3" extension, 6" extension - Breaker handle - Sockets 4-15mm - 6 point sockets
3/8" drive socket set - Box, ratchet, 1" extension, 2-4", 6-10" extension - Breaker handle bar - Metric universal flex socket set, 10mm-19mm - Metric - 10-23 MM 3/8 drive sockets - Deep Well Sockets 3/8 drive Metric -10-19mm - 3/8 drive torx bit set 27, 30, 40, 45, 50, 55 - 5/16" 8 pt. socket 3/8" drive
1/2" drive socket set - Box, ratchet, extension 3", 6" 10" (approx.) - Breaker bar handle - 1 universal flex extension, - Standard sockets 13mm-24mm - Deep well sockets 12mm - 24mm - Adapters 1/2 to 3/8, 3/8 and 1/2 drive; 3/8 to 1/4
Combination Wrench Sets - 5/16, 11/32, 1/4, 3/8, 7/16, 1/2, 9/16, 5/8, - Metric - combination 7-19 MM
Tire inflater	Line wrenches 8mm - 17mm
1 Torque Wrench 3/8" drive, 30 to 200 inch lbs	1 Fender cover
1 Pocket screw driver	Pocket telescoping magnet
Screwdriver set 3 phillips, 4 standard	Electrical wire pliers
Scratch awl (ice pick)	Safety glasses
Air Nozzle with rubber tip	Leather shoes
Tire pressure gauge 15-60 lbs.	1 tool box (minimum 3 drawer rolling type cabinet)
Files: 12" round, 12"flat	Dial Indicator - measure in .001" increments clamp-on-base
Micrometer torque wrench, 1/2" drive with ratchet (10 to 150 ft. lb. range)	1 pr. needle nose pliers, with cutter to 6" length
1 pr. interlocking pliers 8" to 9" length	1 pr. vice grip pliers 7" length (approx.)
1 pr. slip point pliers approx. 6" length	12 volt electric test light
1 gasket scraper (putty knife)	heavy duty diagonal side cutter 6" length
true-arc internal & external (conventional)	inspection mirror
2 ball peen hammers	1 punch set - 5 piece - 1/8, 5/16, 3/8, 7/16, 1/2
spark plug guage set (wire type) .035 to .080	feeler guage - flat type ignition and valuve 45"
1 batter post cleaner	1 cold chisel set - 5 piece - 5/16, 7/16, 1/2, 5/8, 11/16
1 thermometer pocket type	snap ring pliers
magnetic tool with handle	14 piece metric hex wrench set 2mm - 19mm
torx screwdriver set T15-T30	leather gloves for welding, goggles #5 lens & tip
angled pick	1 - 6" electronic digital readout caliper metric/inch conversion
wire brush	Pocket ruler 6" both metric & inches
Hand-held digital multimeter Minimum Required Features: - D.C. volts, 0.5 percent accuracy or better - A.C. volts - D.C. current, 0-10 amps or 0-20 amps - Resistance, Diode Check - Frequency, 0-50Khz - Duty cycle Optional features: - Temperature - RPM - Dwell - Max-min-average - Data hold - Analog bar graph - Pulse Width (MS)

» Tools & Supplies

Costs & Financial Aid